63-968.fm Page 1 Friday, July 2, 1999 2:19 PM
Cat. No. 63-968
OWNER’S MANUAL
Please read before using this equipment.
Radio-Controlled Clock
63-968.fm Page 3 Friday, July 2, 1999 2:19 PM
Snooze Control — lets you temporarily silence the alarm for
about 8 minutes so you can sleep a little longer.
Low Battery Indicator — appears when the batteries are
weak.
Display Backlight — lets you see all information on the display
in low-light situations.
Manual Clock Setting — let you manually set the clock if your
radio cannot receive the necessary radio signal.
3
63-968.fm Page 4 Friday, July 2, 1999 2:19 PM
CONTENTS
Preparation ............................................................................ 5
Installing the Batteries ........................................................ 5
Replacing the Batteries ............................................... 8
Placing the Antenna ........................................................... 8
Mounting the Clock ............................................................ 9
Selecting a Location .................................................... 9
Mounting the Antenna ............................................... 11
Daylight Saving Time ....................................................... 11
Operation ............................................................................. 12
Changing the Time Zone .................................................. 12
Using the Alarm ............................................................... 12
Setting the Alarm Time .............................................. 12
Turning the Alarm On/Off ........................................... 13
Using Snooze ................................................................... 14
Using the Display Light .................................................... 14
Special Features .................................................................. 15
Manually Setting the Time, Date, and Language ............. 15
Turning Automatic Time Setting Off/On ............................ 16
Care and Maintenance ........................................................ 17
Resetting the Clock .......................................................... 18
Specifications ...................................................................... 19
4
63-968.fm Page 5 Friday, July 2, 1999 2:19 PM
PREPARATION
INSTALLING THE BATTERIES
Your clock requires two AAA batteries (not supplied) for power.
For the best performance and longest life, we recommend Ra-
dioShack alkaline batteries.
Cautions:
• Use only fresh batteries of the required size and recom-
mended type.
• Do not mix old and new batteries, different types of batter-
ies (standard, alkaline, or rechargeable), or rechargeable
batteries of different capacities.
Follow these steps to install batteries.
1. Pull the tab on the battery compartment cover in the direc-
tion of the arrow to remove it.
2. Place the batteries in the compartment as indicated by the
polarity symbols (+ and –) marked inside.
3. Replace the cover.
5
63-968.fm Page 6 Friday, July 2, 1999 2:19 PM
Notes:
• If the clock does not operate after you install the batteries,
remove them and wait about 5 seconds until the display
clears. Then reinstall them.
• The clock displays the day of the week in English. To set
the clock so it displays in another language, see “Manually
Setting the Time, Date, and Language” on Page 15.
• The clock is set to automatically search for a radio signal to
set the time and date when you install the batteries. To set
the clock manually instead, see “Manually Setting the Time,
Date, and Language” on Page 15.
Immediately after you install the batteries, all of the clock’s dis-
play elements briefly appear, then
and : flash. Then the
clock scans for the radio signal and the map of the United
States flashes for about 2 minutes. While the clock scans for
the radio signal, you might see any of the following:
What You See
What it Means
The clock received a radio signal strong
enough to set the date and time within the
last 96 hours.
The time and date were set manually.
6
63-968.fm Page 7 Friday, July 2, 1999 2:19 PM
What You See
What it Means
The clock has not received a radio signal
strong enough to set the date and time
within the last 96 hours. Reposition or ro-
tate the antenna before 2, 3, 4, or 9 AM, or
3 or 9 PM, or set the date and time manu-
ally (see “Manually Setting the Time, Date,
and Language” on Page 15).
No indicator
You have turned off the automatic time
setting feature. See “Turning Automatic
Time Setting Off/On” on Page 16 to turn
that feature back on.
The clock is receiving the radio signal and
the time/date will be set shortly.
The clock is receiving a radio signal, but
the reception is not strong enough to set
the clock. Reposition or rotate the antenna
until you see
before the antenna icon
stops flashing.
7
63-968.fm Page 8 Friday, July 2, 1999 2:19 PM
Notes:
• On very cloudy and stormy days, the radio signal might not
be strong enough to set the clock.
• If the clock does not receive a strong signal within about 2
minutes, it stops scanning and looks for a signal again at
the next preprogrammed time (see “Turning Automatic
Time Setting Off/On” on Page 16).
Replacing the Batteries
When
flashes, the display dims or disappears, or the
clock stops working properly, replace the batteries.
Cautions:
• Dispose of old batteries promptly and properly. Do not bury
or burn them.
• If you do not plan to use the clock for several weeks,
remove the batteries. Batteries can leak chemicals that can
destroy electronic parts.
PLACING THE ANTENNA
While the clock is scanning for the radio signal, place the anten-
na at least 4 inches (10 cm) away from the clock, on a window
or a wall near a window. If es not appear while the clock
is checking the time signal, reposition or rotate the antenna until
the icon flashes.
8
63-968.fm Page 9 Friday, July 2, 1999 2:19 PM
MOUNTING THE CLOCK
You can place the clock on any flat surface such as a desk,
shelf, or table, or mount it on a wall using hook-and-loop tape
(not supplied).
Selecting a Location
Choose a location indoors near a window to mount the clock, so
you can mount the antenna near the window. The clock’s anten-
na cord extends up to about 3 feet.
Cautions:
• Do not place the clock or antenna where it will be in direct
sunlight.
• Keep the clock and antenna away from heat or cold
sources such as stoves, heating and air conditioning vents,
and radiators.
• Do not mount the clock near a TV, high power cable, or
metal table because these could interfere with radio signal
reception.
• The antenna is permanently attached to the clock. Do not
cut or try to change the length of the antenna cord.
• Avoid placing the antenna’s cord where it could be pinched
or cut.
9
63-968.fm Page 10 Friday, July 2, 1999 2:19 PM
To place the clock on a flat surface, turn the base on the bottom
of the clock clockwise until it stops, then place the clock on the
surface.
To mount the clock on a wall using hook-and-loop tape (not
supplied), follow these steps.
1. Use a damp cloth to clean the back of the clock. Let the
surface dry.
2. Remove the backing from one side of the tape and stick
that side to the back of the clock.
Note: Do not place the hook-and-loop tape over the clock’s
battery compartment cover.
3. Remove the backing from the other side of the tape and
press the clock firmly onto the mounting surface.
10
63-968.fm Page 11 Friday, July 2, 1999 2:19 PM
Mounting the Antenna
After you have found the best location for reception (see “Plac-
ing the Antenna” on Page 8), attach the antenna to the mount-
ing surface using the supplied double-sided tape or hook-and-
loop tape (not supplied).
DAYLIGHT SAVING TIME
The radio signal automatically adjusts for daylight saving time
so the time displayed on the clock is accurate, regardless of the
time of year.
Hint: If you are in an area that does not use daylight saving
time, press ZONE/AUTO OFF three times to set the time zone to
one zone west of where you are to compensate for daylight sav-
ing time. Then, simply select your own time zone when it is not
daylight saving time.
11
63-968.fm Page 12 Friday, July 2, 1999 2:19 PM
OPERATION
To switch between viewing the seconds display and the day of
the week, press MODE/SET. To switch between viewing the
month/date and the alarm time, press ALARM STOP/ALARM
SET.
Note: After the clock successfully receives a good signal,
appears for about 96 hours. It might change during the radio
signal reception times but will return to
ception time.
at the end of the re-
To test the reception at a specific location and update the set
time at any time (instead of waiting for the preprogrammed
times), turn off automatic time setting, then turn it back on (see
“Turning Automatic Time Setting Off/On” on Page 16).
CHANGING THE TIME ZONE
The clock automatically shows a time zone (P for Pacific, M for
Mountain, C for Central, or E for Eastern). You can set it if nec-
essary to show your time zone. To change the time zone, re-
peatedly press ZONE/AUTO OFF until your time zone is
highlighted.
USING THE ALARM
Setting the Alarm Time
1. Hold down ALARM STOP/ALARM SET until the alarm hour
digits flash.
12
63-968.fm Page 13 Friday, July 2, 1999 2:19 PM
2. Repeatedly press or hold down +/AUTO ON to advance the
hour digits.
3. Press ALARM STOP/ALARM SET. The minute digits flash.
4. Repeatedly press or hold down +/AUTO ON to advance the
minute digits.
5. Press ALARM STOP/ALARM SET to store the setting. The
alarm time appears.
Notes:
• To switch between viewing the alarm time and the month/
date, repeatedly press ALARM STOP/ALARM SET.
• The alarm time does not need to be displayed for the alarm
to sound.
Turning the Alarm On/Off
Press ALARM ON/OFF to turn on the alarm.
appears. Then,
at the set alarm time, the display lights for about 14 seconds.
flashes and the alarm sounds a soft beep about every 2
seconds.
After 20 seconds, 2 quick beeps sound every 2 seconds and
the volume increases slightly. After 20 more seconds, 3 quick
beeps sound every 2 seconds and the volume increases again
to its maximum level. After another 20 seconds, the beeping be-
comes continuous (about 4 beeps per second) and sounds for
about 1 minute.
13
63-968.fm Page 14 Friday, July 2, 1999 2:19 PM
After 2 minutes, the alarm turns off automatically. The first time
this happens, the snooze feature activates and
flash. In about 8 minutes, the alarm sounds again. If the alarm
turns off automatically a second time, remains on the dis-
continues to
play and the alarm will not sound again until the set alarm time
the next day.
To silence the alarm, press ALARM STOP/ALARM SET.
re-
mains on the display and the alarm sounds at the set alarm time
the next day.
To turn off the alarm, press ALARM ON/OFF.
disappears.
USING SNOOZE
When the alarm sounds, you can press SNOOZE/LIGHT to si-
lence the alarm for about 8 minutes. flashes. After about 8
minutes, the alarm sounds again. You can repeatedly use the
snooze feature for up to 24 hours.
USING THE DISPLAY LIGHT
Press SNOOZE/LIGHT to light the display for about 5 seconds.
14
63-968.fm Page 15 Friday, July 2, 1999 2:19 PM
SPECIAL FEATURES
MANUALLY SETTING THE TIME,
DATE, AND LANGUAGE
When you turn off automatic time setting or if the clock does not
receive a good radio signal, you can manually set the time and
date.
Important: The clock automatically updates the time and date
whenever you program it to automatically set the time and date
(see “Turning Automatic Time Setting Off/On” on Page 16) and
it receives a good radio signal. If you do not want this to hap-
pen, turn off automatic time setting.
1. Repeatedly press ZONE/AUTO OFF to select the desired
time zone. As you press ZONE/AUTO OFF, the time zone you
select is highlighted on the display and a letter (P for
Pacific, M for Mountain, C for Central, or E for Eastern)
appears above the time zone.
2. Hold down MODE/SET until the hour digit flashes.
3. Repeatedly press or hold down +/AUTO ON to set the hour.
Note: AM appears for AM hours and PM appears for PM
hours.
4. Press MODE/SET. The minute digits flash.
5. Repeatedly press or hold down +/AUTO ON to set the
minute.
6. Press MODE/SET. The year digits flash.
15
63-968.fm Page 16 Friday, July 2, 1999 2:19 PM
7. Repeatedly press +/AUTO ON to set the year.
8. Press MODE/SET. The current hour, minute, and day of the
week appear, and the month digit flashes.
9. Repeatedly press +/AUTO ON to set the month.
10. Press MODE/SET. The date digit flashes.
11. Repeatedly press +/AUTO ON to set the date.
12. Press MODE/SET. A letter representing the language used
for the day of the week flashes.
13. Repeatedly press +/AUTO ON to select the desired lan-
guage (E for English, F for French, or S for Spanish).
14. Press MODE/SET. The selected time, month, date, and time
zone settings appear.
TURNING AUTOMATIC TIME SETTING
OFF/ON
You can turn off automatic time setting. You might want to do
this if you move to a different area and you are unsure if the
time-setting signal is available there.
To turn off automatic time setting, hold down ZONE/AUTO OFF
for about 3 seconds.
and the map of the United States dis-
appear. The selected time zone indicator and the time and date
for that zone appear.
To turn on automatic time setting, hold down +/AUTO ON for
about 3 seconds.
16
63-968.fm Page 17 Friday, July 2, 1999 2:19 PM
CARE AND MAINTENANCE
Your RadioShack Radio-Controlled Clock is an example of su-
perior design and craftsmanship. The following suggestions will
help you care for your clock so you can enjoy it for years.
Keep the clock dry. If it gets wet, wipe it dry imme-
diately. Liquids might contain minerals that can cor-
rode the electronic circuits.
Use and store the clock only in normal temperature
environments. Temperature extremes can shorten
the life of electronic devices, damage batteries, and
distort or melt plastic parts.
Keep the clock away from dust and dirt, which can
cause premature wear of parts.
Handle the clock gently and carefully. Dropping it
can damage circuit boards and cases and can
cause the clock to work improperly.
Use only fresh batteries of the required size and
recommended type. Batteries can leak chemicals
that damage your clock’s electronic parts.
Wipe the clock with a damp cloth occasionally to
keep it looking new. Do not use harsh chemicals,
cleaning solvents, or strong detergents to clean the
clock.
17
63-968.fm Page 18 Friday, July 2, 1999 2:19 PM
Modifying or tampering with the clock’s internal components
can cause a malfunction and might invalidate its warranty. If
your clock is not performing as it should, take it to your local
RadioShack store for assistance.
RESETTING THE CLOCK
If the clock stops operating properly or locks up, you can reset
it. To reset the clock, use a pointed object such as a straight-
ened paper clip to press RESET on the back of the clock.
All display segments briefly appear, then the clock starts to
scan for a radio signal.
18
63-968.fm Page 19 Friday, July 2, 1999 2:19 PM
SPECIFICATIONS
Power .............................................. 3V with Two AAA Batteries
Snooze ............................................................ About 8 Minutes
7
Dimensions (HWD) .................................. 39/16 × 23/4 × /8 Inches
(91 × 70 × 22 mm)
Weight (without Batteries) ................................................ 7.2 oz
(204 g)
Specifications are typical; individual units might vary. Specifica-
tions are subject to change and improvement without notice.
19
63-968.fm Page 20 Friday, July 2, 1999 2:19 PM
Limited One-Year Warranty
This product is warranted by RadioShack against manufacturing defects in
material and workmanship under normal use for one (1) year from the date of
purchase from RadioShack company-owned stores and authorized Ra-
dioShack franchisees and dealers. EXCEPT AS PROVIDED HEREIN, Ra-
dioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED
WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FIT-
NESS FOR A PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO
THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED
HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO
LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PER-
SON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF
THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WAR-
RANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING
FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE,
OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSE-
QUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty
lasts or the exclusion of incidental or consequential damages, so the above
limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product
and the RadioShack sales receipt as proof of purchase date to any Ra-
dioShack store. RadioShack will, at its option, unless otherwise provided by
law: (a) correct the defect by product repair without charge for parts and la-
bor; (b) replace the product with one of the same or similar design; or (c) re-
fund the purchase price. All replaced parts and products, and products on
which a refund is made, become the property of RadioShack. New or recondi-
tioned parts and products may be used in the performance of warranty ser-
vice. Repaired or replaced parts and products are warranted for the
remainder of the original warranty period. You will be charged for repair or re-
placement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable
to acts of God, abuse, accident, misuse, improper or abnormal usage, failure
to follow instructions, improper installation or maintenance, alteration, light-
ning or other incidence of excess voltage or current; (b) any repairs other than
those provided by a RadioShack Authorized Service Facility; (c) consumables
such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping
or insurance costs; or (f) costs of product removal, installation, set-up service
adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor,
Fort Worth, TX 76102
04/99
We Service What We Sell
07A99
Printed in China
|